Please tell us what your company makes:
|
What function will our device provide:
|
Operating Range: (include units of measure)
|
|
Set Point: (specify whether on rise or fall)
|
|
Desired set point repeatability:
|
|
Desired deadband value:
|
|
System pressure cycle: (What are the min/max pressures the device will see under normal use?)
|
min
max
|
System pressure surges:
|
|
Differential pressure cycle, if applicable:
|
min
max
|
Differential pressure surges, if applicable:
|
|
Switching frequency: (How often will the switch cycle on/off? Please express in terms of cycles per day, week, etc.)
|
cycles
per
|
Expected switching life (over service life)
|
cycles |
Device being switched:
|
|
Electrical load:
|
amps
max
|
Type of load:
Resistive Inductive Lamp
|
Switch contacts form:
SPDT SPST N.O. SPST N.C. DPDT Dual
|
Switch Protection:
Hermetic Vaper Basic (unsealed)
|
Wiring termination:
Screw terminals Push on tabs Wire leads
Other
|
Pressure connection (specify size and type, e.g. NPT, UNF, etc.):
|
Pressure connection material:
|
|
Elastomer seal material:
|
|
Electrical connection:
1/2 NPTM 1/2 NPTF 3/4 NPTF Other
|
Process medium sensed:
|
|
Process medium temperature
|
F min
F max
|
Operating ambient temperature
|
F min
F max
|
Storage ambient temperature
|
F min
F max
|
Environment:
Indoor Outdoor
|
Enclosure rating (specify NEMA or IP rating or describe conditions of use):
|
Hazardous area classification (specify Div 1, 2; Zone 0, 1, 2):
|
|
Agency approvals (specify UL, FM, CSA, CENELEC, CE, etc.):
|
|
Mounting dimensions:
height: width: depth:
|
If temperature unit, specify desired on/off control values:
|
If temperature unit, specify rate of change in terms of degrees F per second, minute hour etc.:
|
Other specifications or requirements:
|
